Description

This LoRaWAN® IoT sensor measures ambient temperature and relative humidity in buildings, flats and houses.

It transmits the data via a LoRaWAN® radio network.

Also available in:

• Temperature measurement only
• with CO2 measurements
• with presence detection

Characteristics

• LoRaWAN®, Class A
• LoRaWAN® Certified
• Easy to use and deploy
• Data compression with batch report
• Pull-out detection
• Up to 10 years autonomy
• Temperature and Humidity measurements
  – Range : 0°C / +55°C; 0%rH / 100%rH
  – Accuracy: +/-0.2°C; +/-2%rH
  – Resolution: 0.1°C; 0.5%rH
• Tropical version available for installation in humid areas

Description

The VAQA’O Multi Lite sensor measures temperature, relative humidity, carbon dioxide (CO₂) concentration in the ambient air, VOC index, brightness, and detects presence in a room in a building, apartment, or house. VAQA’O Multi Lite monitors indoor air quality (IAQ) and presence to meet your energy efficiency goals.

Data is transmitted via a public or private LoRaWAN® radio network.

Also available:

• • temperature and humidity measurements
  • temperature, humidity, and CO2 measurements
  • temperature and humidity measurements and presence detection

Features

• • • LoRaWAN®, Class A
    • Easy to install and use
    • Differential data compression
    • > 3 years of battery life
    • Measurement ranges/accuracy:
      – Temperature: +0°C to +55°C / ± 0.2°C
      – Humidity: 0% to 100% RH / ± 2%
      – CO2: 0-5000ppm/ ± 100ppm
      – VOC: index of 0 – 500 / ±5
      – Brightness: 1 Lux to 65 kLux
      – Presence: detection up to 12 meters
    • Indicator lights (LED): network and IAQ combination
    • Buzzer for configurable audible alarms
    • Local or remote CO2 calibration

Description

The VAQA’O Lite sensor measures the temperature, relative humidity, and Carbon Dioxide (CO2) concentrations in the ambient air of a room in a building, a flat or a house. 
The data is transmitted via a LoRaWAN® radio network.

Also available in:

• temperature measurement only
• with temperature and humidity measurements only
• with presence detection

Characteristics

• LoRaWAN®, Class A
• Easy to install and use 
• > 5 years of autonomy
• Measuring ranges / accuracies:
  – Temperature: +0°C to +55°C / ± 0.2°C
  – Hygrometry: 0% to 100%rH / ± 2%.
  – CO2: 0-5000ppm/ ± 100ppm
• Indicators (LEDs): Network pairing and IAQ

Description

The TEMP’O sensor measures the ambient temperature in buildings, flats, houses, etc. The TEMP’O detects the removal of its wall base, and alerts immediately to remove any doubt about the temperature measurement.
The data is transmitted via a LoRaWAN® radio network.

Also available in:

• with temperature measurement
• with CO2 measurements
• with presence detection

• LoRaWAN®, Class A
• LoRaWAN® Certified
• Easy to install and use
• Data compression
• > 10 years of autonomy
• Pull-out detection
• Temperature measurement
  – Range: +0°C to +55°C
  – Accuracy: +/-0.2°C
  – Resolution: 0.1°C

Description

This LoRaWAN® IoT sensor measures ambient temperature and relative humidity in buildings, flats and houses.

It transmits the data via a LoRaWAN® radio network.

Also available in:

• Temperature measurement only
• with CO2 measurements
• with presence detection

Characteristics

• LoRaWAN®, Class A
• LoRaWAN® Certified
• Easy to use and deploy
• Data compression with batch report
• Pull-out detection
• Up to 10 years autonomy
• Temperature and Humidity measurements
  – Range : 0°C / +55°C; 0%rH / 100%rH
  – Accuracy: +/-0.2°C; +/-2%rH
  – Resolution: 0.1°C; 0.5%rH
• Tropical version available for installation in humid areas

Description

Le capteur IoT LoRaWAN® MOVE’O Lite mesure la température ambiante, l’humidité relative, la luminosité et détecte la présence dans les bâtiments, bureaux, appartements, maisons, …
Il transmet les données via un réseau radio LoRaWAN® public ou privé.

Egalement disponible :

• mesure de la température uniquement
• mesure de la température et humidité uniquement
• avec mesure du taux de CO2

Caractéristiques

• LoRaWAN®, Class A
• LoRaWAN Certified
• Simplicité d’installation et d’utilisation
• > 5 ans d’autonomie
• Plages de mesure / précisions :

– Mouvement : jusqu’à 12m, détection 102° x 92°, 68 zones.
– Température : 0°C à +55°C / ± 0,2°C
– Hygrométrie : 0% à 100%rH / ± 2%
– Luminosité : 0,01Lux à 83 000 Lux / 5%

• Voyants (LED) : association réseau

Description

The HYGROTEMP’O Sensor Remote Probe is designed to monitor and measure temperature and relative humidity, and transmits the data over a public or private LoRaWAN® radio network.

Characteristics

• LoRaWAN®, Class A
• Easy to install and use
• SHT30F remote temperature & humidity sensor; IP67 sensor; end cap protected by a special PTFE membrane
• Fast response to changes in both measured variables
• IP68 waterproof enclosure
• Up to 8 years of autonomy
• Threshold alerts
• Batch mode report
• Standard report

Description

The PT1000 Temperature Sensor has to been interfaced with PT1000 probes to collect and transmit temperatures for all types of Smart building or industrial applications.

Characteristics

• LoRaWAN®, Class A
• Easy to install and use
• 1x PT1000 3 wires input
• 1x 9-24 Volts external power supply input
• > 8 years of autonomy
• IP55 enclosure

Description

The Outdoor Temperature sensor measures the outside temperature of buildings and the inside temperature of cold rooms, and transmits the data over a public or private LoRaWAN® radio network.

Characteristics

• LoRaWAN®, Class A.
• Easy to install and use.
• IP67 waterproof on-board probe; stainless steel tip for improved responsiveness
• Measurement of instantaneous temperatures at regular intervals to calculate minimum/maximum and average temperatures
• IP67
• Up to 8 years of autonomy.