WATTECO Video Tutorials

WATTECO sensors video guides

On this page we provide you with video instructions for our sensors so that you can start and install them easily.

How to start the LED / ON-OFF sensors

Led sensors*

ON: Place the magnet on the “ILS” label for more than 1 second. In return, the red LED flashes rapidly. Remove the magnet. As soon as the green LED flashes, your sensor is searching for association to the network. When the green LED stays on for 3 seconds, the sensor has successfully associated with the network.

OFF: Place the magnet on the “ILS” label for more than 5 seconds. In return, the red LED flashes rapidly, then 5 times slowly. When the LED no longer lights up, the sensor is switched off.

 

*The sensors concerned: In’O, Pulse Sens’O, Toran’O AtEx, Pulse sens’O AtEx, Modbus, Outdoor T°C, PT 1000, RT 1 CTN, RT 2 CTN, Remote THR, Ventil’O, Flash’O: the LEDs can be placed differently. 
See Quick Start Guide p1

Vaqa’O & temperature and humidity sensors

ON: Place the magnet on the “ILS” label for more than 1 second. In return, the red LED flashes rapidly. Remove the magnet. As soon as the green LED flashes, your sensor is searching for a network association. When the green LED stays on for 3 seconds, the sensor has successfully associated with the network.

OFF: Place the magnet on the “ILS” label for more than 5 seconds. In return, the red LED flashes quickly, then 5 times slowly. When the LED no longer lights up, the sensor is switched off.

How to start the sensors with Buzzer / ON-OFF

How to start Intens’O
ON /OFF

ON: Place the magnet on the “ILS” label for more than 1 second. In return, the buzzer will sound quickly. Remove the magnet, as soon as you hear a higher pitched sound. Your sensor is seeking association with the network if it likes high pitched, spaced out sounds. When you hear a melody, the sensor has successfully associated with the network.

OFF: Place the magnet on the “ILS” label for more than 5 seconds. In return, the buzzer will sound rapidly. When the sound becomes different from the buzzer, the sensor is switched off.

How to start Monit’O – Press’O – Press’O +
ON /OFF

ON: Place the magnet on the “ILS” label for more than 1 second. In return, the buzzer will sound quickly. Remove the magnet, as soon as you hear a higher pitched sound. Your sensor is seeking association with the network if it likes high pitched, spaced out sounds. When you hear a melody, the sensor has successfully associated with the network.

OFF: Place the magnet on the “ILS” label for more than 5 seconds. In return, the buzzer will sound rapidly. When the sound becomes different from the buzzer, the sensor is switched off.