Description

The RS485 Modbus Master connects existing wired Modbus devices to the LoRaWAN® network without replacing them.

The sensor regularly transmits its data over the LoRaWAN® radio network.

Features

• LoRaWAN®, Class A
• Easy to install and use.
• Management of all variables (read and write) for a ModBus RTU slave from a remote server via a LoRaWAN® network.
• IP67/68-rated enclosure.
• Over 10 years’ battery life

Description

Fissur’O is a LoRaWAN® sensor for monitoring cracks in marine environments.

The sensor regularly transmits its data via the LoRaWAN® radio network.

Features

• LoRaWAN®, Class A
• Easy to install and use
• Data compression
• 5-year battery life
• Measurement ranges / accuracies:
  • Crack width: 1 mm to 10 cm
  • Standard accuracy: ±1 mm – see terms and conditions.
  • Resolution: 0.1 mm

Description

Alt’O is a LoRaWAN® sensor for detecting the height of clear water, brackish water, etc.

BENEFITS & FEATURES

• LoRaWAN®, Classe A
  Easy to install and use
  Data compression
  2 to 5 years of battery life
  61GHz FMCW radar technology
  Measurement ranges/accuracy:
  – Water depth : 30 cm to 8m
  – Standard accuracy +/-10mm, see conditions
  – Resolution 1 mm

Description

The Lev’O+ LPG Level solution enables remote reading of LPG gas tank levels. The tank level is measured and transmitted periodically over the LoRaWAN® network to the remote application. The unit is composed of the TORAN’O AtEx zone 1 sensor and a Rochester Gauge.

Characteristics

• LoRaWAN®, Class A
• Ready to install bundle with probe and transmitter.
• Easy to deploy and use.
• Plug & play with TORAN’O device (not supplied)
• Probe power supplied by TORAN’O for the duration of the measurement
• Remote level measurement probe on 2m cable:
  – Output voltage: ratiometric 10-90%
  – Accuracy: +/- 4% of full scale.
  – Horizontal LPG tank (vertical on demand)

Description

The LEV’O+ Liquid Level solution is used to determine the level of a tank, cistern or cavity, to accurately monitor variations in the level of the liquid and does not require knowledge of its geometric dimensions. By measuring the relative pressure of the liquid (water, fuel, oil, liquid fertiliser, etc.), LEV’O+ transmits the data over a public or private LoRaWAN® radio network, thus enabling the application to establish the relationship between the analog value and the height of the liquid.

Characteristics

• Easy to deploy and use
• Plug & play with TORAN’O device (not supplied)
• Probe power supplied by TORAN’O for the duration of the measurement
• Remote level measurement probe on 5m cable:
  – Pressure range: 0…0.3 bar
  – Accuracy: +/- 0.8% of full scale
  – Resolution: 0.1% of full scale
  – Relative sensor 4-20mA
  – Suitable for fitting in 1-inch pipe

Description

CLOS’O is a LoRaWAN® sensor that determines if a gateway is properly closed. Installed on the frame (or on the fixed part), it detects the position of a magnet fixed on the gate’s moving part.

The sensor reports over a public or private LoRaWAN® radio network the open or closed state of the gate. An alert is transmitted if the sensor is pulled out.

Characteristics

• LoRaWAN®, Class A
• Autonomous sensor
• Detection of gate opening and closing
• Large detection distance: up to 35mm
• Sensor pullout alert
• Very simple installation
• More than 5 years of autonomy
• Set intended for outdoor use

Description

The ATM’O sensor measures temperature, relative humidity and atmospheric pressure in outdoor and industrial environments and transmits the data via a public or private LoRaWAN® radio frequency network.

Characteristics

• LoRaWAN®, Class A
• Battery life: 5 years minimum (with “real time” configuration)
• Operating range: -20°C to +55°C
• Measures temperature, relative humidity and atmospheric pressure:
  – Range: 90kPa/115kPa; -20°C/+55°C; 0%/100%rH
  – Accuracy: +/-1.5%; +/-0.1°C; +/-1.5%rH
• Tropicalised measuring board
• Vertical antenna
• IP68 outdoor enclosure